Spells and Sarcasm ~ I Bite Pissy Kitty ~ Unity Stamp Co.

Hello there crafty friend! 

Today I'm sharing a funny Halloween card I made using the awesome new I Bite Pissy Kitty stamps from Unity. This kitty is PURR-FECTION!! I love the sassy face and those bat wings!!!!

I started by picking some papers that complimented our pissy kitty. I chose a couple from the Spooky Days {paper pack}. Once I had those figured out, I colored up the kitty and pumpkin using Copic markers.

Here's a quick list of the Copic markers I used:

Kitty: YR20, YR21, YR15, YR27

Bat Wings / Nose / Eyes: C0, C2, C3, C5

Bow: G000, G21

Pumpkin: G000, G21, Y11, Y15, E000, E15, E59

I then die cut the kitty using a die from the Scallops & Squares {nesting dies}. I tilted the die at an angle for fun. Sometimes it's hip to not be 'centered' square. LOL! 

I couldn't pick just one sentiment... they are just TOO FUNNY!! I adhered the boo sentiment to the top of the square and then added a bunch of foam tape to the back. I also popped up the other sentiment using foam tape. And then I finished off the card with three orange enamel dots.

Thanks so much for stopping by!

Inky hugs,

Crystal

{BYSHC} Sketch Challenge 60 ~ Frosty & Feisty {Pissy Kitty} ~ Unity Stamp Co.

Hello there crafty friend!

I'm back with a little inspiration for the {BYSHC} Sketch Challenge 60 hosted in the Build Your Stash Holiday Cardmakers Facebook group! Today I'm sharing a fun holiday card featuring fun papers, dies and stamp from our fabulous Sponsor, Unity Stamp Co.

I started with my paper layers for this card. I pulled out my Catmas Party {paper pack} and trimmed the background layer to 4 x 5-1/4". I adhered it to a red top fold card base. I cut four strips of patten paper measuring 2-5/8 x 7/8".  I die cut a piece of red card stock with a die from the Deckle & Stitches Nesting Die Set. And then I adhered the strips in the center. I started by adhering the top and the bottom pieces. And then I was able to center the middle pieces and glue them down.

I stamped the fun kitty from the Frosty & Feisty {Pissy Kitty} using Black Amalgam ink and colored it up with Copic markers. And then I fussy cut it leaving a border. 

Here's a quick list of the Copic markers I used:

Kitty: N0, N2, N4, C0, C2, R20

Eyes: YG11, YG09

Hat: RV10, RV02, RV14

Ground: C0, C2

I adhered the sentiment to the center panel and then popped up the center panel using foam tape. And then I adhered the kitty. I love this pissy kitty! That face cracks me up!

Here's a look at {BYSHC} Sketch Challenge 60 for the month of August. If you're interested in seeing a bit more inspiration for this sketch, check out the amazing inspiration from the design team over on the {BYSH} Cardmakers blog! The design team, as always, rocked this sketch!

Thanks so much for stopping by!

Inky hugs,

Crystal

Tawny Owl Paperie Inky Inspiration Sketch 33 ~ Sun's Out, Sass Out Pissy Kitty ~ Unity Stamp Co.

 Hello there crafty friend!

Today I'm sharing one last card for the Tawny Owl Paperie Inky Inspiration Sketch Challenge 33 in the Tawny Owl Paperie Inky Inspiration Facebook group. I inked up the cute and grumpy kitty from the Sun's Out, Sass Out Pissy Kitty stamps. Another super fun cat!

I stamped the kitty and sentiment with Amalgam Black ink on Stampers Select White card stock and colored the kitty up with Copic Markers. I fussy cut the kitty leaving a white border around the image. 

Here's a list of the Copic Markers I used:

Kitty: C0, C2, C3, R00, R20

Eyes: YG11, G14

Bikini: BG000, BG10, BG15

Flamingo Floatie: RV10, RV02, RV04, Y11, Y15, C0, C2

Water: B000, B00

Here's a look at the fun sketch for Tawny Owl Paperie Inky Inspiration Sketch Challenge 33. The sketch, as always, is meant to inspire not require. So let the sketch lead in your design, but don't feel limited by it. 

I paired up the pissy kitty with the awesome Sun's Out, Sass Out Pissy Kitty Coordinating {paper pack}. I adhered the circle, sentiment, flamingo papers and the leaves paper together and then added foam tape to the back and popped the panel up on the card. I also slipped a simple scalloped edge in there that I had punched out of white card stock using an old punch from Stampin' Up. My panel was then adhered to a white A2 top fold card base.

This fun kitty and the papers are also available together as a bundle here... Sun's Out, Sass Out Pissy Kitty Bundle. I finished off the card with a few white enamel dots from my stash. There's just a few days left to play along with this sketch challenge. I hope you can find time to play along. Have an ink-tastic week!

Thanks so much for stopping by!

See ya next time.

Inky Hugs,

Crystal

{Please note that comment moderation is on. Your lovely comment will appear once approved.}

Meowica ~ Purr-ade Crasher Pissy Kitty ~ Unity Stamp Co.

Hello there crafty friend! 

Who is ready for summer?! The latest pissy kitty is!! LOL! Or maybe not!! Hahaha... it's such a cute stamp! This cutie is called Purr-ade Crasher Pissy Kitty from Unity.

I just had to ink her up and color her with my Copic markers.

 

Here's a list of the Copic markers I used:

Kitty: C0, C1, C2, R00, R20

Glasses: R20, R14, R27, Y11, Y15

Shirt: Y11, Y15, B000, B00, B02

Pants: R20, R14, R27

Sparkler: Y11, Y15, YR15

I die cut the kitty using a die from the Scallops & Circles {nesting dies}. I die cut one of the sentiments using a die from the Distressed Tickets {ticket dies} and then I ink smooshed it with Candied Apple and Lumberjack Plaid Distress Inks. I just trimmed up the 'meowica' sentiment. The sentiments are adhered to the circle and I popped them all up on the card.

The background was a scrap in my stash that I had run through my big shot with the Bricked embossing folder from Tim Holtz. It's not super easy to see the distressed bricks in the background in my photos but it's visible in person. I ink smooshed the background with Salty Ocean and Candied Apple Distress Inks. I die cut the background using the largest die from the Deckle & Stitches Nesting dies. I adhered all of my layers to a white A2 top fold card base. And then I finished it off with some fun sequins from my stash. Love it!

Thanks so much for stopping by!

See ya next time.

Inky hugs,

Crystal

{Please note that comment moderation is on. Your lovely comment will appear shortly.}

Tawny Owl Paperie Inky Inspiration Sketch 33 ~ Pissy Party ~ Unity Stamp Co.

 Hello there crafty friend!

Today I'm sharing some inspiration for the Tawny Owl Paperie Inky Inspiration Sketch Challenge 33 in the Tawny Owl Paperie Inky Inspiration Facebook group. I inked up the super sassy and cute kitty from the Pissy Party stamps. I love this cat!

I stamped the kitty and sentiment with Amalgam Black ink on Stampers Select White card stock and colored the kitty up with Copic Markers. I die cut the kitty using a circle die from the Scallops & Circles {nesting dies}. 

Here's a list of the Copic Markers I used:

Kitty: C0, C2, R00, R20, Colorless Blender

Eyes: Y11, BG10

Hat: R20, R14, R27

Cupcake: Y11, Y15, YG11, YG03, BG000, BG10, BG15

Ground: BG000, BG10, BG15

Here's a look at the fun sketch for Tawny Owl Paperie Inky Inspiration Sketch Challenge 33. The sketch, as always, is meant to inspire not require. So let the sketch lead in your design, but don't feel limited by it. 

I paired up the pissy kitty with the awesome Oh Hey! It's Your Day! {paper pack}. The bottom layers {polka dots and numbers} are adhered to a white A2 top fold card base. I also slipped a cute scalloped edge in there that I had punched out of Pure Poppy card stock from Papertrey Ink using an old punch from Stampin' Up.

I adhered the sentiment to the circle focal image and adhered that to the plaid banner. I then covered the entire back with foam tape and popped it up on the card. I finished off the card with a few red enamel dots from my stash. I'm having so much fun with this sketch! I hope you can find time to play along. Have an ink-tastic week!

Thanks so much for stopping by!

See ya next time.

Inky Hugs,

Crystal

{Please note that comment moderation is on. Your lovely comment will appear once approved.}

Tawny Owl Paperie Inky Inspiration Sketch 32 ~ Purr-Fection Princess Pissy Kitty ~ Unity Stamp Co.

 Hello there crafty friend!

Today I'm sharing one last card for the Tawny Owl Paperie Inky Inspiration Sketch Challenge 32 in the Tawny Owl Paperie Inky Inspiration Facebook group. I inked up the wonderfully sassy Purr-Fection Princess Pissy Kitty from Unity. 

I stamped the sassy kitty and sentiment with Amalgam Black ink on Stampers Select White card stock and colored her highness up with Copic Markers. 

Here's a list of the Copic Markers I used:

Crown: BG10, BG01, BG34

Kitty: C0, C2, C3, R00, R20

Eyes: YG11, G14

Tutu: RV10, RV02, RV04

Ground: C2

Background: BG000

Here's a look at the fun sketch for Tawny Owl Paperie Inky Inspiration Sketch Challenge 32. The sketch, as always, is meant to inspire not require. So let the sketch lead in your design, but don't feel limited by it.

I paired up this funny kitty with the Oh Hey! It's Your Day! {paper pack}. It was so hard to just pick two papers from this paper pack for my card! LOL! 

I distressed the edges of the kitty panel and the sentiment using the residual ink on my brown blending brush. This sketch challenge ends on Monday, May 26th at 11:59pm PDT. I hope you can find time to play along. Have an inkredible week!

Thanks so much for stopping by!

See ya next time.

Inky Hugs,

Crystal

{Please note that comment moderation is on. Your lovely comment will appear once approved.}

Curlers & Catitude Pissy Kitty ~ Unity Stamp Co. ~ Coffee Loving Papercrafters

 Hello there crafty friend!

 I'm so excited to share another fun coffee themed card as a guest designer for Coffee Loving Papercrafters. 

Today I'm sharing a sassy kitty card featuring the adorably snarky Curlers & Catitude Pissy Kitty. I absolutely adore this kitty stamp from Unity Stamp Co.

I stamped the kitty with Black Amalgam ink from Gina K. Designs and colored her up with Copic markers. Here's a quick list of the Copic markers I used to color up the kitty:

Kitty: YR21, YR15, N0, N2, N4, C00, R00, R20

Eyes: YG11, G14, C00, C2

Curlers: BG10, BG01, BG72

Mug: R000, R83, R37, E21

I paired up the snarky kitty with the Perk Me Up {paper pack} also from Unity. It has a fun vintage vibe that I love! I die cut the kitty and distressed the edges with a bit of Vintage Photo and Ground Espresso Distress Ink.

I stamped, trimmed and also distressed the edges of the sentiment. I adhered it to the bottom of the die cut circle and popped them both up with foam tape. Lots of fun to make this one! Hope you've been inspired to get inky this weekend with some caffeine themed goodies!

Thanks so much for stopping by!

See ya next time.

Inky hugs,

Crystal

{Please note that comment moderation is on. Your lovely comment will appear once approved.}